RoofCatLadderFactory-Direct Cat Ladder Pricing
Cat Ladder Price Per Metre
Cat ladder price per metre or per foot on your drawing, quoted in 24 hours. Factory-direct rates from Dengtai's Shijiazhuang plant — no distributor markup, compliance docs with every order.
Years Manufacturing
Countries Exported
Quote Response
Years Manufacturing
Per Metre & Per Foot Pricing
Cat Ladder Price Per Metre: Factory-Direct Rates
Transparent, itemized pricing in per-metre or per-set terms. Rates below are indicative ex-works (EXW) Shijiazhuang — FOB and CIF quoted on request. Every delay at quote stage pushes the whole installation window into the next sailing.
| Configuration | Unit | Indicative (EXW) |
|---|---|---|
| HDG steel cat ladder, climb section | per metre | ~$95 / m |
| Complete 6 m ladder with safety cage | per set | $600–900 / set |
| SS304 / SS316 stainless ladder | per metre | On drawing |
| US catalog comparison, same spec | per unit | $1,325–$7,400 |
Indicative rates for budget reference. Your exact cat ladder price per metre is confirmed from the drawing, quantity and finish.
Material Grade
Q235B hot-dip galvanized (HDG 85–100 µm, ISO 1461) is the value default. SS304/SS316, aluminium and GRP change the per-metre rate — stated line by line.
Configuration & Finish
Cage hoops, rung type, standoff brackets and anti-slip treads. A caged 6 m ladder lands at $600–900, versus ~$570 for the bare climb section.
Quantity & Logistics
Larger orders cut per-metre cost — tooling and galvanizing setup spread across more units. Choose EXW, FOB or CIF; container packed knocked-down or assembled.
Cost Per Foot Estimates
Cat Ladder Cost Per Foot: How to Estimate
Working in feet? Divide the per-metre rate by 3.28 for a per-foot figure — roughly $29 per foot for HDG climb sections. We quote per foot, per metre or per set straight from your drawing, so your unit of measure never slows the RFQ.
- Price on your drawings
Stile spacing, wall offset, rung type and cage specified on your sketch get itemized
- Free drawing review
Our engineers verify loads and fixing spacing before the quote is issued
- No hidden per-unit fees
Material, rungs, brackets, finishing and packaging listed line by line
Quote to PO in Five Steps
Cat Ladder Price Per Metre, Quoted in 24 Hours
From drawing to purchase order without a distributor in the chain. Buy cat ladders direct and hold the factory to the quoted per-metre rate.
Send Drawing or Sketch
Height, stile spacing, material preference and quantity. A photo of the site works if no drawing exists.
24h Itemized Quote
Per metre or per set, EXW/FOB/CIF, with the compliance file listed. No chasing — quote within 24 hours.
Free Drawing Review
Engineers verify rung load, cage offset and fixing spacing against OSHA, EN ISO 14122-4 and BS 4211.
PO to Dispatch
Production 15–25 working days. DoC, MTC 3.1 and structural calcs ship with the order — no extra charge.
Engineered Parameters
What Sets the Cat Ladder Price Per Metre
The cat ladder price per metre reflects the engineered spec below — every ladder is built to a named standard, not a generic catalogue item.
| Specification | Value |
|---|---|
| Material | Q235B HDG 85–100 µm (ISO 1461) · SS304/SS316 mill-certified · aluminium · GRP |
| Rung Load | 1.5 kN per rung |
| Rung Spacing | 225–230 mm |
| Fixing Spacing | ≤1500 mm centres |
| Max Single Section | 25 m (rest platforms above) |
| Cage Geometry | Cage hoop geometry per EN ISO 14122-4 (650–800 mm from stile line); hoop pitch ≤1500 mm |
| Standards | OSHA 1910.28 / 1910.23 · EN ISO 14122-4 · BS 4211 · AS 1657 |
| Docs Included | DoC · MTC 3.1 · structural calculation sheet |
Order-Level Documentation
Compliance Docs with Every Order
OSHA, BS 4211 & EN ISO 14122 compliant. Every order-level DoC and full file ships at no extra cost — no chasing paperwork after delivery.
- DoC — Declaration of Conformity
Order-level conformity to OSHA 1910.28, EN ISO 14122-4 and BS 4211
- MTC 3.1 Material Certificate
EN 10204 3.1 traceability for Q235B / SS304 / SS316
- Structural Calculation Sheet
Engineer-signed for your rung load and fixing arrangement
Maker-Direct, 20+ Years
Factory-Direct Cat Ladder Price Per Metre
Factory cat ladders direct from the Dengtai plant in Jingxing Mining District, Shijiazhuang — founded 2004. Factory-direct pricing, 15–25 day production, quote within 24 hours.
Factory-Direct
No distributor markup. Quote straight from the production floor, shipped to 50+ countries.
Itemized Quote
Material, machining, galvanizing, packaging — line by line, per metre, no hidden fees.
Compliance Kit Free
DoC, MTC 3.1 & structural calcs included with every order at no extra charge.
15–25 Day Production
Steel cut, welded, HDG'd and packed in-house. Fixed lead time on the quote.
Exporting Since
Export Countries
Years Manufacturing
Quote Turnaround
Get My Cat Ladder Price Per Metre Quote
Get My Cat Ladder Price Per Metre Quote
Send a drawing or sketch and receive an itemized cat ladder price per metre within 24 hours — with a free drawing review and the full compliance file listed on the quote.
- 24h itemized quote
- Free drawing review
- DoC, MTC & structural calcs included