RoofCatLadderFactory-Direct Stainless Steel Cat Ladder Supplier
Stainless Steel Cat Ladder
Stainless or marine grade cat ladders for roof, tanks and coastal plant. Factory direct from Dengtai, with OSHA, BS 4211 & EN ISO 14122 compliance docs and a quote in 24 hours.
Years Manufacturing
Countries Exported
Quote Response
Years Manufacturing
Why Stainless for Cat Ladders
Stainless Cat Ladder: SS304 vs SS316 Material Grades
The right grade for a stainless steel cat ladder is the one that survives your environment longest. We compare the stainless grades we fabricate in-house — so you pick on corrosion, weldability and cost, not guesswork. A material mismatch near coastal or chemical exposure turns a capital asset into a maintenance line item.
| Property | SS304 | SS316 / SS316L | HDG Steel |
|---|---|---|---|
| Corrosion Resistance | Excellent — acid-pickled | Superior in chlorides, grade-verified | Zinc sacrificial, repairable |
| Best Environment | Food, pharma, coastal | Marine, offshore, chemical | Exterior industrial, roofs |
| Weldability | Good | Better for structural welds | Welded, then dipped |
| Maintenance | Low | Low — no rust bloom | Touch-up zinc |
| Relative Cost | Mid | High | Low |
| Certificates | MTC 3.1 | MTC 3.1 | MTC 3.1 |
SS316 is the marine grade cat ladder choice where chloride levels, salt spray or chemical wash-down demand maximum corrosion resistance — with mill-certified material certificates for traceability.
Stainless Steel Cat Ladder Specifications
Stainless Steel Cat Ladder Specifications & Optional Configurations
Every stainless steel cat ladder is fabricated to order with the engineered parameters below — rung spacing, fixing centres and grade matched to your access height and environment.
| Specification | Value |
|---|---|
| Stainless Grades | SS304 · SS316 · SS316L (acid-pickled) |
| Rung Load | 1.5 kN design load (verified in the structural calculation) |
| Rung Spacing | 225–230 mm centres |
| Fixing Spacing | ≤1500 mm centres |
| Max Single Run | 25 m — rest platforms above |
| Fasteners | SS316L bolts — no galvanic corrosion |
| Surface Finish | Acid-pickled · brushed · mirror-polished |
| Standards | OSHA 1910.28 · EN ISO 14122-4 · BS 4211 · AS 1657 |
| Compliance Docs | DoC · MTC 3.1 · coating/finish report where applicable · structural calc |
Tell us your site environment and our engineers confirm the grade within 24 hours.
Single runs to 25 m; caged stainless steel cat ladder sections above that use rest platforms.
Safety Cage
SS304 hoops and vertical straps matching rung spacing, bolt-on to the stiles — fitted on climbs where your governing standard requires a cage.
Hinged Safety Gate
Self-closing landing gate with SS316L hinge, supplied pre-drilled to your stainless cat ladder.
Rest / Landing Platform
Stainless chequer-plate platform at specified break heights for long climbs to roof and tank access.
Wall & Parapet Brackets
SS304 standoff brackets, 150–250 mm standard, with ≤1500 mm fixing centres.
Compliance Docs with Every Order
Compliance Docs with Every Order
OSHA, BS 4211 & EN ISO 14122 compliant — order-level DoC and full documentation ships with every stainless steel cat ladder order, at no extra cost.
- DoC — Declaration of Conformity
To OSHA 1910.28 / 1910.23, EN ISO 14122-4, BS 4211 and AS 1657
- MTC 3.1 Material Certificate
EN 10204 3.1 — grade traceability to mill, batch grade-verified
- Structural Calculation Sheet
Engineer-signed for the ladder and fixing arrangement
Made In-House, Not Resold
Factory-Direct Stainless Steel Cat Ladder from Dengtai
Dengtai has manufactured access ladders in Shijiazhuang since 2004. Stainless steel cat ladders are cut, welded, pickled, finished and trial-assembled under one roof — so you buy maker-direct, with no distributor markup and full traceability.
- In-house stainless fabrication
SS304 / SS316 / SS316L welded, acid-pickled and passivated on site
- mill-certified grades & fasteners
Positive material identification verified to spec before assembly
- Export to 50+ countries
EXW, FOB or CIF — loose container parts or full assemblies
Factory-Direct Pricing
Factory-Direct Stainless Steel Cat Ladder Pricing
Transparent, itemized quotes in 24 hours, 15–25 day production and compliance docs with every order. A 6 m caged stainless steel cat ladder set is quoted per configuration, factory-direct ex-works — far below US catalog prices for the equivalent unit.
Factory-Direct
No distributor markup — quote straight from the production floor, shipped EXW/FOB/CIF.
24h Itemized Quote
Grade, machining, pickling, finishing, packaging — line by line, plus free drawing review.
15–25 Day Production
From approved drawing to dispatch; the compliance file ships with the crate.
20+ Years · 50+ Countries
Marine Grade Cat Ladder Projects: Delivered Worldwide
From offshore and coastal plant to food-processing lines, our marine grade cat ladders are chosen where salt air and chlorides destroy carbon steel. We quote, fabricate and ship to spec — anonymised references available on request.
- Coastal & offshore plant access
SS316L with acid-pickled finish — no rust bloom in salt spray
- Food & pharma processing
Wash-down-safe stainless, mill-certified, MTC traceable
- Tank & silo climb systems
Caged stainless steel cat ladder + rest platforms to 25 m runs
Request a Quote for Your Stainless Steel Cat Ladder
Get My Stainless Steel Cat Ladder Quote
Tell us your grade, climb height and quantity — we return an itemized factory quote within 24 hours, with free drawing review and the full compliance file on every order.
- 24h itemized quote
- Free drawing review
- DoC, MTC 3.1 & structural calcs included
Stainless Steel Cat Ladder FAQ
Related Cat Ladder Pages
All Cat Ladders
Browse by type, material & application
Steel Cat Ladders
Q235B structural steel for roofs & plant
Galvanised HDG Cat Ladders
Q235B hot-dip galvanized, ISO 1461
Aluminium Cat Ladders
Corrosion resistant, lightweight alloy
Standards Hub
OSHA, EN ISO, BS, AS requirements
Get a Quote
24h itemized factory quote