RoofCatLadderFactory-Direct Flat Roof Cat Ladder
Flat Roof Cat Ladder
Cat ladders for flat and pitched roofs with parapet access options. OSHA, BS 4211 & EN ISO 14122 compliant — order-level DoC and full docs included.
Years Manufacturing
Countries Exported
Quote Response
Years Manufacturing
Flat & Pitched Roof Access
Cat Ladder for Pitched Roof and Flat Roof Scenarios
Flat and pitched roofs need permanent, code-compliant access for maintenance, HVAC, cladding and gutter work. Our factory-made cat ladders climb to the parapet edge or roof level with a fixed, bolt-on system — no scaffold, no on-site drilling. An access route that fails inspection means stop-work orders and retrofit scaffolding at site rates.
- Compliant roof access
OSHA 1910.28, EN ISO 14122-4 and BS 4211 builds
- Built for outdoor exposure
HDG steel, SS304 or SS316 to suit your roof
- Parapet and wall mounting
Standoff brackets sized to your parapet height
Cat Ladder Roof Parapet Access
Cat Ladder Roof Parapet Access & Configurations
Choose the configuration that fits your roof: caged or open, with landing platform or direct to parapet edge, made to your height in HDG steel or stainless.
With Safety Cage
Factory-welded cage hoops for climbs above 3 m per EN ISO 14122-4 (OSHA 1910.28: 24 ft / 7.3 m) — fall protection included.
With Landing Platform
Intermediate platforms break long climbs and give a stable step onto flat roofs and parapet doorways.
Standoff & Custom Height
150–250 mm wall standoff brackets and any height to your drawing — HDG, SS304, SS316 or aluminium.
Specifications
Flat Roof Cat Ladder Specifications
Every flat roof cat ladder is made-to-order with the engineered parameters below — measured to your roof height, parapet and wall offset.
Get My Flat Roof Cat Ladder Quote| Specification | Value |
|---|---|
| Material | Q235B HDG 85–100 µm · SS304 · SS316 |
| Stile Size | 60×8 mm flat bar (custom up to 75×8 mm) |
| Rung Spacing | 250–300 mm centres |
| Rung Load | 1.5 kN per rung |
| Wall Standoff | 150 / 200 / 250 mm standard |
| Fixing Spacing | ≤1500 mm centres |
| Cage Option | From 3 m per EN ISO 14122-4 · from 24 ft (7.3 m) per OSHA 1910.28 |
| Finish | HDG ISO 1461 · acid-pickled stainless |
| Standards | OSHA 1910.28 · EN ISO 14122-4 · BS 4211 |
Compliance Docs: MTC & DoC With Every Order
Compliance Docs with Every Flat Roof Cat Ladder Order
No chasing paperwork after delivery — every flat roof cat ladder order ships with its full compliance file.
- DoC — OSHA 1910.28 & EN ISO 14122-4
Declaration of Conformity to the relevant standard
- MTC 3.1 Material Certificate
EN 10204 3.1 for Q235B / SS304 / SS316
- Structural Calculation Sheet
Engineer-signed for the ladder and bracket arrangement
Factory-Direct Pricing
Factory-Direct Flat Roof Cat Ladder
Buy flat roof cat ladders direct from the factory — we quote transparent, itemized pricing in 24 hours with a free compliance kit. Production runs 15–25 working days.
Factory-Direct
No distributor markup. Quote direct from the production floor.
Itemized Quote
Material, machining, finishing, packaging — line by line, no hidden fees.
Compliance Kit Free
DoC, MTC & structural calcs included with every order at no extra charge.
Get a Flat Roof Cat Ladder Quote
Get a Flat Roof Cat Ladder Quote
Free quote in 24 hours + free compliance kit with every order. Tell us your roof type and height — we handle the rest.
- 24h itemized quote
- Free drawing review
- DoC, MTC & structural calcs included