Dengtai logo RoofCatLadder.com

Buy Cat Ladders USA — Factory-Direct, No Middleman

Cat Ladder USA

OSHA 1910.23 compliant cat ladders for US projects; factory-direct. Buy straight from the Dengtai production floor — no distributor markup, full compliance docs with every order.

Get My Factory Quote Talk to an Engineer
OSHA 1910.23/1910.28 EN ISO 14122-4 DoC & MTC Included 24h Factory Quote
Cat Ladder USA galvanized cat ladder factory-assembled for US roof access
20+

Years Manufacturing

50+

Countries Exported

24h

Quote Response

20+

Years Manufacturing

Buy Cat Ladders USA — No Middleman Chain

Buy Cat Ladder USA: Factory-to-Site in 3 Steps

Order direct from the factory: one supplier, one PO, one responsible partner. You skip the distributor markup and get the full compliance file with every shipment. Retrofit access after handover always costs more than specifying it correctly at tender stage.

1. Send your project specs

Height, material (HDG / SS304 / SS316), quantity and standard. We respond with an itemized quote within 24 hours, plus a free drawing review.

2. Approve drawings & place your PO

Production runs 15–25 working days. Trial-assembled and jig-checked before hot-dip galvanizing.

3. Ship to your US site

EXW, FOB or CIF — flat-pack container loads or fully assembled, with DoC, MTC and structural calcs in the crate.

Cat Ladder USA order handled during crane work and site delivery

Maker-Direct Cat Ladders, Built to Spec

Cat Ladder US Project Specifications

Every Cat Ladder USA unit is fabricated to order in Q235B HDG steel or SS304/SS316 stainless, engineered to your site height and mounting surface. Custom cat ladders, standard dimensions — we build either.

Get My Factory Quote
SpecificationCat Ladder USA Value
RungΦ20 mm solid round bar @ 254–356 mm (10–14 in) per OSHA 1910.23 — re-pitched for US orders
Rung Width500 mm clear
Safety CageΦ700 mm internal hoops
MaterialQ235B HDG 85–100 µm (ISO 1461) · SS304 · SS316
Fixing Spacing≤1500 mm to structure
Load Rating1.5 kN per rung
Max Single Section25 m (rest platforms above)
StandardsOSHA 1910.23/1910.28 · EN ISO 14122-4 · BS 4211

OSHA, BS 4211 & EN ISO 14122 — DoC, MTC & Structural Calcs

Cat Ladder USA Compliance Docs with Every Order

No chasing paperwork after delivery — every Cat Ladder USA order ships with its full compliance file, at no extra cost.

  • DoC — OSHA 1910.23/1910.28 & EN ISO 14122-4

    Declaration of Conformity for your US project file

  • MTC 3.1 Material Certificate

    EN 10204 3.1 for Q235B / SS304 / SS316

  • Structural Calculation Sheet

    Engineer-signed, per your configuration and mounting

Cat Ladder USA compliance components and HDG steel finish

Factory-Direct Cat Ladder USA Pricing

Factory-Direct Cat Ladder USA

HDG cat ladders at factory-direct per-metre rates, ex-works; a 6 m caged assembly quoted as a complete set — versus US catalog multiples. Itemized quote in 24 hours, production 15–25 working days.

No Middleman Markup

You buy from the people who bend the steel. Compare our ex-works rate against US distributor catalogs.

24h Itemized Quote

Material, fabrication, finishing, packaging, freight options — line by line, no hidden fees.

15–25 Day Production

Free drawing review before fabrication, then trial-assembled and shipped flat-pack or fully assembled.

Cat Ladders, 50+ Countries

Cat Ladder USA Supplier: 20+ Years Manufacturing

Since 2004, Dengtai has supplied Cat ladder projects across 50+ export countries, including US distribution centers, water treatment plants and industrial facilities. Every project ships with the same compliance file we put in your crate.

20+

Years Manufacturing

50+

Export Countries

20+

Years Manufacturing

Cat Ladder USA supplier stack of HDG cat ladder sections ready for US export

Get a Cat Ladder USA Quote

Get My Factory Quote — Cat Ladder USA

Tell us your height, material and quantity. We respond with an itemized factory quote within 24 hours — compliance docs included on every order.

  • 24h itemized quote
  • Free drawing review
  • DoC, MTC & structural calcs included
Talk to an Engineer on WhatsApp
+ More specifications (height, quantity, cage, standard)

Your info is safe. No spam, unsubscribe anytime. Privacy Policy

Cat Ladder USA FAQ

Do you ship cat ladders to the USA?
Yes — we ship to US projects in any state via EXW, FOB or CIF, as flat-pack container loads or fully assembled. Production runs 15–25 working days, and we confirm your freight option in the 24-hour quote.
Are your cat ladders OSHA compliant for US projects?
Yes — every unit is engineered to OSHA 1910.23 and 1910.28. Each order ships with a Declaration of Conformity, an MTC 3.1 material certificate (EN 10204) and engineer-signed structural calculation sheets, at no extra cost.
How much does a cat ladder cost for a US site?
Pricing depends on climb height, material and cage configuration, so we quote itemized ex-works rates within 24 hours rather than publish averages. Factory-direct rates typically land well below US catalog equivalents for the same compliance documentation. See our cat ladder price guide for what drives cost per metre.
Can I order custom lengths and materials?
Yes — we manufacture custom lengths up to 25 m per single section (rest platforms above that), in Q235B HDG steel, SS304/SS316 or aluminium. Send your height, material and quantity and we confirm within 24 hours.
Is there a minimum order for US buyers?
No — trial orders start from 1 unit, so a single roof-access ladder is fine. Container mixes of ladders, cages, gates and brackets are quoted per load plan, and we ship EXW, FOB or CIF to any US port or site.
What installation support comes with a US order?
Anchor plans and installation drawings are included with every order, and sections bolt together — no site welding. Where specified, builds are trial-assembled in the factory before galvanizing, so your crew only torques bolts on arrival per the engineer-signed drawing pack.
Can you match a non-standard mounting height between roof levels?
Custom heights are engineered, not rounded to a catalog length. Send the exact climb height, wall offset and landing level; the drawing review is free within the 24-hour quote, and we confirm rung count, bracket positions and section splits before production starts.
Do you re-pitch rungs for OSHA 1910.23?
Yes. US orders are re-pitched to the OSHA 1910.23 requirement of 254–356 mm (10–14 in) between rungs using Φ20 mm solid round bar, instead of the 225–230 mm EN ISO pitch we build for other markets. Rung load stays at 1.5 kN per rung.
Which finish should a US site specify for long-term corrosion protection?
Q235B hot-dip galvanized steel with an 85–100 µm coating per ISO 1461 covers most US rooftop and industrial exposure. For coastal, chemical or washdown sites, specify SS304 or SS316 stainless — both mill-certified, with EN 10204 3.1 papers included free with the order.

Related Cat Ladder Pages

All Cat Ladders

Browse by type, material & application

Export Worldwide

Cat ladders for international projects

OSHA Cat Ladders

1910.23 / 1910.28 requirements explained

Cat Ladder Pricing

Transparent factory-direct rate guide

Standards Hub

OSHA, EN ISO, BS, AS requirements

Get a Quote

24h itemized factory quote

We use cookies to analyze site traffic. Learn more about cookies

Get Quote WhatsApp